Loading…
Mon–Sat 8am–9pm · Bilingual EN / ES
Bilingual quote in 24 hours · 5★ Google · $1M insured
Typical price
$5.75–$8.50 per linear foot
Warranty
20 years
Materials
Aluminum
Aluminum is what 90% of Central Florida homeowners install, and for good reason: it's light enough that hidden hangers hold it without fascia damage, it accepts a baked-enamel paint finish that holds color for 20+ years, and it costs a third of copper while delivering 80% of the service life. Our aluminum installs use 0.032-gauge sheet (the residential standard; we never substitute the lighter 0.027 that fails on hangers within five years), formed on-site into K-style profile (the dominant residential look) or half-round on request. Color match is the unsung superpower: we hold 26 baked-enamel swatches against your trim, your stucco, and your roof in actual daylight before quoting — most homeowners are surprised that the right color makes the gutter recede visually, while the wrong color makes the eaveline look heavy. Standard 6-inch K-style handles most Orlando, Kissimmee, and Polk County homes — it is what the majority of Orlando homes already have and what we recommend by default. 5-inch is fine for very small homes or simple roof areas; we step up to 7-inch on Brevard County hurricane-coast properties, Apopka and Sanford homes under heavy oak/pine debris, two-story homes, or any roof with a steep pitch that concentrates water flow. Pricing across the regular 5-, 6-, and 7-inch sizes runs $5.75 to $8.50 per linear foot installed including hangers, downspouts, and disposal of old gutters; $375 install minimum. 20-year material warranty against peeling, chalking, rust-through, and color fade.
Color matching session: 26 swatches held against your trim and roof in daylight before any decision; most homeowners shift their initial preference once they see colors in real light.
Profile recommendation: 6-inch K-style for typical Orlando lots (the default), 5-inch only for very small homes or simple roofs, 7-inch for Brevard hurricane coast, Apopka oak canopy, or steep-pitch homes; half-round on request for period architecture.
On-site extrusion: 0.032-gauge aluminum rolled into one continuous piece per fascia line, no mid-run joints, fabricated to within 1/8 inch of your measured length.
Hidden-hanger installation: every 24 inches per FL Building Code, screwed (not nailed) into solid fascia, sealed corners with industrial silicone, downspouts strapped at 6-foot intervals.
20-year written warranty: covers paint failure, rust-through, hanger pull-out from manufacturing defect, and seam-corner leak from installation craftsmanship.
Real answers to the questions Central Florida homeowners ask us most.
We service all 25 priority cities across 7 Central Florida counties. Click your area below to see local details.
Free estimate within 24 hours — bilingual EN/ES.
